Polyethylene anticorrosive equipment of the firm “CLECIM” (Clesim, made in France) is designed for coating steel pipes with a diameter of 57-530 mm and a length of up to 36 meters (with the possibility of expanding the insulated pipe up to 1020 mm). The equipment allows the production of up to 2000 km of pipelines (with a pipe length of 12 m) per year of various configurations with several types of inner and outer coating.

There are 3 types of external coating available:

  • single layer based on epoxy powder
  • two-layer based on polyethylene and an adhesive underlayer
  • three-layer based on polyethylene, adhesive sublayer and epoxy powder

Internal pipe insulation is provided:

  • single layer based on epoxy powder

To accommodate this set of equipment, a room of more than 10,000 square meters is required.

Equipment manufactured in 1992, mothballed in an open area in wooden plywood boxes, wrapped in a specialized polyethylene film. The packaging is suitable for transportation by rail, water transport. The equipment is fully prepared for transportation and installation. To transport the entire set of equipment, 65 standard rail cars are required.

Highly reinforced and reinforced outer two-layer and three-layer anti-corrosion insulation of steel pipes using extruded polyethylene is the most effective construction of anti-corrosion waterproofing compared to other methods such as bitumen insulation, wrapping with polymer tapes, etc., due to the fact that the pipe in extruded insulation is completely monolithic and does not allow contact of the VUS steel pipe with an aggressive environment.

Also, at the request of the customer, pipes are manufactured in VUS insulation in additional polyurethane foam insulation.

A layer of adhesion, which is applied to the metal surface of the pipe, guarantees adhesion of the anti-corrosion coating to the surface of the steel pipe. The use of modern application technologies in the production of VUS pipes allows protecting the product from corrosion for 30 years of operation. The design of such pipes is highly durable, and with proper operation, the service life of such a pipe can increase up to 50 years.

We offer this line with long-term storage at a price significantly lower than a similar new line.


A total of 71 technological positions, a brief composition:

Cost and more detailed and information on request.

Brief technical description and photo of the production line:

Factory pipe insulation equipment – CLECIM / Image of this highly enhanced CLECIM anti-corrosion coating line Clecim